PCA Info
Display the installed firmware level, amount of RAM and the number of
recorders found in the system, and the number of recorders licensed in
this system. In addition, network information including IP address,
network mast and MAC address are displayed.
Writer Info
Display Recorder manufacturer, model number and firmware revision.
While it is possible to use different writer types, and different firmware
revisions, R-Quest recommends using the same writer type and the
latest approved writer firmware.
Hard Drive Info
Display the manufacturer, model number and capacity of the installed
hard drive.
Autoloader Info
Display Autoloader information.
Upgrade License
Enabled options can be changed via these functions. To get a new key to
enable new options contact R-Quest or an authorized R-Quest distributor.
Show Current Key
Display current installed options Key String. You MUST have this Key
String available when contacting
R-Quest
or an authorized
R-Quest
distributor.
Enter New Key
Enter new installed options Key String. Entering this Key String can
change your installed options. Contact R-Quest or an authorized R-Quest
distributor to get a new key string. See the Entering Text section of this
chapter for instructions on entering text.
Set-up Menu
These menus are used to select various options available on the TCP
Autoloader. Some menu options may depend on the settings of other options,
so the actual menus that appear are context sensitive.
Job Options
These functions set up options used during the duplication process. Use
the up arrow /\ key to scroll up or press the down arrow key \/ to scroll
down. Press the YES or NO key to select the desired values.
19 of 37
