When the displayed selections are correct press the ENTER key to save or
press the STOP key to exit and leave the options unchanged.
Burn Discs
If set to NO the system is in simulate mode and will not actually write a
disc. It goes through all the motions and is a good test to see if the TCP
Autoloader is in operating condition.
NOTE:
If this is set to NO the following warning message will be displayed:
WARNING Copier is in SIMULATE mode, Press YES to continue or any other
key to cancel
and the BURN/SIM field of the LCD will show
SIM
(for
Simulate Burn) while copying discs.
Compare Master
If set to YES the Master Disc will be read a second time and the new
read compared with the first. If the data are not the same a BAD
MASTER error will be displayed.
NOTE:
This feature is disabled for any Audio or Video tracks on the CD.
This is not a limitation of the TCP series, but a limitation of the CD
format low-level error correction systems.
Compare Copy
If set to YES every discs just recorded will be re-read and compared to
the data written (the disc will be Verified). If the data are not the same or
there is a read error the disc will be considered bad and rejected.
NOTE:
This feature is disabled for any Audio or Video tracks on the CD.
This is not a limitation of the TCP series, but a limitation of the CD
format low-level error correction systems.
Audit Copy
If set to YES every disc recorded will be audited to confirm that the entire
discs was actually recorded. This involves reading the first and last part
of the discs to ensure that they are readable.
Multi Image HD
If set to YES discs read will be named and stored on the hard drive for
future use. Many CD images can be kept on the hard drive.
If set to NO a master read will still be saved to the hard drive but it will
have no name and will be overwritten by the next master read.
