Menus Structure
Use the up /\ and down \/ arrow keys to position the cursor (a > character on the
left most column of the display) to the desired menu item. Then use the ENTER
key to select it.
Following is a description of each menu selection.
Copy
Use this menu option to start copying discs by reading the master to the hard
disk and then copy from the hard disk image. See the Copying section of this
chapter for further instructions
Compare
Use this menu option to start verifying copies. See the Verifying section of this
chapter for further instructions.
Batch Mode
Use this menu option to start Batch copying of discs. In batch mode, you
interleave blank discs with masters, so that you can automatically create
copies from several master discs – unattended.
WARNING - VERY IMPORTANT
:
DO NOT use BD-RE discs as ‘master discs’ while in batch mode. It will
be re-formatted and re-written.
Image Functions
This menu option is used to maintain image files kept on the hard drive. This
menu item will not be shown if Multi Image HD is not enabled in the
Set-up
Menu | Job Options
function.
Load New Master
Read a Master Disc and put the image on the hard drive without copying or
verifying.
List of Images
Show all disc images currently stored on the hard drive.
Show HD Free Space
Display the currently available hard drive space. If disc images have been
erased more usable space may be created by defragmenting the hard drive
using
Image Functions | Defragment HD
function.
15 of 37
