Sticky Media
If set to yes the loader will be more persistent when picking discs.
Picking behaviour will include a shake during an input above the input
stack. Certain types of media have been found to ‘stick’ together, and
although the loader mechanism has been designed to pick, and
physically touch one disc at a time, the attraction between discs can
cause two to be picked at once. It is highly recommended that you avoid
using any media that exhibit ‘sticky’ properties. This setting will help
when you have to use ‘sticky’ media.
Last Char Name
This option determines the behaviour exhibited on entering image
names on the duplicator. If this is set to YES the cursor carries forward
the previous character entered. This allows for faster entering of names
– through fewer button presses. If a space is required, or the next letter
you need is closer to the start of the alphabet than the previous
character entered, then moving the cursor back one space, and then
forward two spaces will reset the cursor character. The cursor only
carries forward the previous character if it was changed, and so by first
shuffling backwards, you have a blank. It does take some getting used to
– but with use, it does provide an improved way of quickly naming
images.
When set to NO the system behaves in the way described in the
‘Entering Text’ section further through this manual.
Recorder Set-up
This menu allows you to select the recorder speeds used for each type of
drive I/O. To select higher speeds press the up arrow key
/\
. To select lower
speeds press the down arrow key
\/
. Only those speeds supported by the
installed drive will be displayed.
When the displayed speeds are set as desired press the ENTER key to
save or press the STOP key to leave the speeds unchanged at their
original values.
NOTE:
Slowing the read speed down can sometimes help reading
scratched or otherwise damaged discs.
