Entering Text (using the integrated keypad)
Since there are no letters on the keyboard, text must be entered with the
arrow keys. When text needs to be entered all available character positions
are displayed between square brackets as follows:
[ _ _ _ _ _ _ _ _ _ _ _ _ _]
If the initial text is not defined all blanks will be displayed. Otherwise the
starting text will be displayed. Press the left
<
or right
>
arrow to move the
cursor the desired character location. Then press the up
/\
or down
\/
arrow to
increment or decrement the displayed character.
Following are the differences for each type of text asked for in various places
in the program.
Disc Image Name
Image names can be up to 14 characters long. Available characters are A-Z,
0-9 and space (blank).
Key String
Key Strings are 14 characters long. Available characters are 0-9 and A-F.
Numbers
Numbers are 4 digits long. Available digits are 0-9.
Disc Image names can be entered using the ‘Last Char Name’. Please also
see ‘Last Char Name’ under Duplication Options above.
Copying Discs
There are two basic methods of copying Discs. The first is to read a master &
start copying immediately. The second is to start copying using a master
image already stored on the internal hard disk (usually created by a previous
Copy job, or by using the
Image Functions | Load New Master
function).
To start copying from a new master, use the up
/\
or down
\/
arrow keys to put
the
>
cursor (on the Left of the LCD display) next to the
Start Copying
menu line.
Press the
ENTER
key to select that menu function. If there is already an image
on the hard drive the following prompt will be displayed:
Read New Master?
27 of 37
