QUANTA W Mainboard Series S210-MBT2W, Technical Manual

Page: 60 / 293

A
BOUT THE
S
ERVER
USB C
ONNECTORS
1-35
[1.3.63] USB Connectors
[1.3.64] Front Panel USB2.0 Connec-
tor
[1.3.66] Internal USB2.0 Type-A
Connector
[1.3.68] eUSB (Zepher) Module
[1.3.69] Intel's Z-U130 Value Solid State Drive (SSD) is a USB
2.0 storage solution built around high performance Intel®
NAND flash memory. This module uses single-level cell Intel
NAND flash memory with cache programming and dual plane
feature set designed to improve overall module performance.
Additionally each module has two TSOP packages attached to
the printed circuit board with densities varied by the number of
die within each package (i.e. 2 GB = 2 X 512 MB die per pack-
age and 4 GB = 4 X 512 MB die per package). The Intel Z-
U130 Value SSD supports the Universal Serial Bus (USB) spec-
ification v2.0 and is backward compatible with v1.1. The mod-
ule uses industry standard connectors which are available in
two sizes. This device can be used with operating systems
compatible with the USB Mass Storage Class specification
v1.0.
[1.3.70] The LP version of eUSB (Zepher) will be used to
increase gap between PCIe cards and the eUSB (Zepher)
device for the 2U rack and to try to use only one type across all
Romley products (customer won't then need to stock two
types). The eUSB (Zepher) LED signal will be hooked up so
that it shows on FP HDD activity LED.
[1.3.65] USB2.0 Baseboard Front-Panel Connector Definition
P
IN
S
IGNAL
N
AME
S
IGNAL
N
AME
P
IN
1 +5V +5V 2
3 USB_N USB_N 4
5 USB_P USB_P 6
7 GND GND 8
9 Key_Pin NC 10
[1.3.67] Internal USB2.0 Type A Connector Definition
P
IN
S
IGNAL
N
AME
1 +5V
2 USB_N
3 USB_P
4 GND
[1.3.71] eUSB (Zepher) Connector Definition
P
IN
S
IGNAL
N
AME
P
IN
S
IGNAL
N
AME
1 +5V 2 NC
3 USB_N 4 NC