QUANTA W Mainboard Series S210-MBT2W, Technical Manual

Page: 200 / 293

BMC C
ONFIGURATION
G
ROUP
3-13
[3.1.101] This Active Directory Settings page in MegaRAC SP-
X as shown on the following figure, allows to Configure Active
Directory Server Settings.
[3.1.102] To open Active Directory Settings page, click Config-
uration > Active Directory from the main menu. A sample
screenshot of Active Directory Settings Page is shown in the
following screenshot:
[3.1.103] Active Directory Settings Page
[3.1.104] Active Directory Settings Page
I
TEM
D
ESCRIPTION
Advanced Settings
Active Directory advanced settings configuration
options are as follows:

Enable Active Directory Authentication,

User Domain name,

Time Out, and

Up to three Domain Controller Server
Addresses.
Role Group ID
The name that identifies the role group in the
Active Directory.

Role Group Name is a string of 255 alpha-
numeric characters.

Special symbols hyphen and underscore are
allowed.
Group Name
This name identifies the role group in Active
Directory.
Note:

Role Group Name is a string of 255 alpha-
numeric characters.

Special symbols hyphen and underscore are
allowed.
Group Domain
The domain where the role group is located.
Note:

Domain Name is a string of 255 alpha-
numeric characters.

Special symbols hyphen, underscore and dot
are allowed.
Group Privilege The level of privilege to assign to this role group.
Add Role Group To add a new role group to the device.
Modify role Group
To modify that role group. Alternatively, double
click on the configured slot.
Delete Role Group To delete an existing Role Group.
[3.1.104] Active Directory Settings Page (Continued)
I
TEM
D
ESCRIPTION