BMC
C
ONFIGURATION
G
ROUP
3-14
[3.1.105] Procedure:
[3.1.106]
Entering the details in Advanced Active Directory Set-
tings Page
3.1.107.1.Click on
Advanced Settings
to open the
Advanced Active Directory Settings Page.
[3.1.108]
F
Advanced Active Directory Settings Page
3.1.109.2.In the Active Directory Settings Page, enter the fol-
lowing details.
3.1.110.3.
Active Directory Authentication:
To enable/dis-
able Active Directory, check or uncheck the
Enable
checkbox respectively.
3.1.112.4.Specify the Domain Name for the user in the
User
Domain Name
field. e.g. MyDomain.com
3.1.113.5.Specify the time (in seconds) to wait for Active
Directory queries to complete in the
Time Out
field.
3.1.114.6.Configure IP addresses in
Domain Controller
Server Address1, Domain Controller Server Address2
& Domain Controller Server Address3
.
3.1.117.7.Click
Save
to save the entered settings and return
to Active Directory Settings Page.
3.1.118.8.Click
Cancel
to cancel the entry and return to
Active Directory Settings Page.
[3.1.119] To add a Role Group
Note:
[3.1.111]
If you have enabled Active Directory Authentication,
enter the required information to access the Active Directory
server.
Note:
Default Time out value: 120 seconds.
Range from 15 to 300 allowed.
Note:
[3.1.115]
IP address of Active Directory server: At least one
Domain Controller Server Address must be configured.
IP Address made of 4 numbers separated by dots as in
"xxx.xxx.xxx.xxx".
Each number ranges from 0 to 255.
First number must not be 0.
Note:
[3.1.116]
Domain Controller Server Addresses will supports
IPv4 Address format and IPv6 Address format.
Summary of Contents for W Mainboard Series S210-MBT2W
