QUANTA W Mainboard Series S210-MBT2W Technical Manual Download Page 240

Page: 240 / 293

BMC

AINTENANCE

ROUP

3-53

menu. A sample screenshot of Power Control and Status page
is shown in the screenshot below.

[3.1.477] Power Control and Status Page

[3.1.478]

The various options of Power Control are given

below.

[3.1.480] Procedure:

[3.1.481]

Select an action and click Perform Action to proceed

with the selected action.

[3.1.483] Maintenance Group

[3.1.484]

This group of pages allows you to do maintenance

tasks on the device. The menu contains the following items:



Firmware Update



Preserve Configuration



Restore Factory Defaults

[3.1.479] Server Power Control

TEM

ESCRIPTION

Reset Server

This option will reboot the system without power-
ing off (warm boot).

Power Off Server –
Immediate

This option will immediately power off the server.

Power Off Server –
Orderly Shutdown

This option will initiate operating system shut-
down prior to the shutdown.

Power On Server

This option will power on the server.

Power Cycle Server

This option will first power off, and then reboot
the system (cold boot).

Perform Action

Click this option to perform the selected opera-
tion.

Note:

[3.1.482]

You will be asked to confirm your choice. Upon con-

firmation, the command will be executed and you will be
informed of the status.

[3.1.479] Server Power Control (Continued)

TEM

ESCRIPTION

Summary of Contents for W Mainboard Series S210-MBT2W






































































































































































































































































































Search results

Summary of Contents for W Mainboard Series S210-MBT2W

Reviews:

Related manuals for W Mainboard Series S210-MBT2W

Brands by name

Popular brands

QUANTA W Mainboard Series S210-MBT2W, Technical Manual

Search results

Summary of Contents for W Mainboard Series S210-MBT2W

Reviews:

Related manuals for W Mainboard Series S210-MBT2W

Brands by name

Popular brands