QUANTA W Mainboard Series S210-MBT2W, Technical Manual

Page: 285 / 293

S
AFETY
I
NFORMATION
S
YSTEM
A
CCESS
W
ARNINGS
7-5
[7.1.49] System Access Warn-
ings
CAUTION!
[7.1.50] T
O AVOID PERSONAL INJURY OR PROPERTY DAMAGE
,
THE
FOLLOWING SAFETY INSTRUCTIONS APPLY WHENEVER ACCESSING
THE INSIDE OF THE PRODUCT
:

Turn off all peripheral devices connected to this product.

Turn off the system by pressing the power button to off.

Disconnect the AC power by unplugging all AC power cords
from the system or wall outlet.

Disconnect all cables and telecommunication lines that are
connected to the system.

Retain all screws or other fasteners when removing access
cover(s). Upon completion of accessing inside the product,
refasten access cover with original screws or fasteners.

Do not access the inside of the power supply. There are no
serviceable parts in the power supply. Return to manufac-
turer for servicing.

Power down the server and disconnect all power cords
before adding or replacing any non hot-plug component.

When replacing a hot-plug power supply, unplug the power
cord to the power supply being replaced before removing
the power supply from the server.
!
CAUTION!
[7.1.51] I
F THE SERVER HAS BEEN RUNNING
,
ANY INSTALLED PRO
-
CESSOR
(
S
)
AND HEAT SINK
(
S
)
MAY BE HOT
.
CAUTION!
[7.1.52] U
NLESS YOU ARE ADDING OR REMOVING A HOT
-
PLUG
COMPONENT
,
ALLOW THE SYSTEM TO COOL BEFORE OPENING THE
COVERS
. T
O AVOID THE POSSIBILITY OF COMING INTO CONTACT
WITH HOT COMPONENT
(
S
)
DURING A HOT
-
PLUG INSTALLATION
,
BE
CAREFUL WHEN REMOVING OR INSTALLING THE HOT
-
PLUG COMPO
-
NENT
(
S
).
CAUTION!
[7.1.53] T
O AVOID INJURY DO NOT CONTACT MOVING FAN BLADES
.
I
F YOUR SYSTEM IS SUPPLIED WITH A GUARD OVER THE FAN
,
DO
NOT OPERATE THE SYSTEM WITHOUT THE FAN GUARD IN PLACE
.
!
!
!