![background image](http://html1.mh-extra.com/html/quadro/quadro4li/quadro4li_administrators-manual_3385935089.webp)
Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.2.x)
88
Inactive
- disables the corresponding SLA line.
PSTN
- allows you to assign the SLA line to the available PSTN lines on the Quadro. This selection disappears when there are no more unassigned
PSTN lines available.
Attention:
By assigning a PSTN line to an SLA line, it becomes unavailable for calls through Auto Attendant or Call Routing Table.
SIP
- used to assign the SLA line to the certain SIP server. This selection has two sub-selections:
•
Custom Settings
- used to define a SIP server and SIP registration parameters. The following parameters are required for this selection:
Username
- the registration username on the SIP server.
Password
- the registration password on the SIP server.
SIP Server
- the IP address or the host name of the SIP
server.
SIP Port
- the port of the SIP server.
Authentication User Name
- an identification parameter to
reach the SIP server. It should be provided by the SIP
service provider and can be requested for some SIP
servers only. For others, the field should be left empty.
Outbound Proxy Host Address
and
Port
- the IP address
or the host name and the port number of the outbound
proxy SIP server. For more details see
•
Use SLA Settings
- choose this selection to use the SIP
settings of another SLA line. This selection is also used to
allow multiple line appearances on the same ITSP provider.
The SLA drop down list is used to select the SLA line
whose SIP settings will be used for the corresponding SLA
line.
The
DID
text field requires an optional identification number
used by some ITSP providers to differentiate between the
call appearances on the selected line.
The
Use DID for outgoing calls
indicates whether the
specified DID number should be included in the Caller ID of
calls initiated from the SLA. If this checkbox is enabled, the
DID number will be sent along with the SIP username. This
checkbox should be enabled if the IP-PSTN provider
authorizes the users by their DIDs.
Fig. II-150: Key System Emulation – SLA# page
The
Forwarding for SLA#
links in the
Advanced Settings
column refer to the
Advanced Settings for SLA#
page where the unconditional or no
answer call forwarding can be configured for each SLA line.
The
Advanced Settings for SLA#
page is used to configure the unconditional or no answer call forwarding for each When the forwarding is
enabled, all incoming calls to the corresponding SLA line will be redirected to the defined destination. If the call forwarding is activated, the
programmable key assigned to the corresponding SLA line will remain in the ON state until the call is disconnected.
The following ways of Call Forwarding are available for the SLA lines:
Unconditional
- all incoming calls to the corresponding SLA line will be forwarded to the specified destinations.
No Answer
- incoming calls will be forwarded to the specified destinations if the corresponding SLA line is not answered within 20 seconds.
The
Enable Service
checkbox selection on the related page activates corresponding call forwarding service on the current SLA line.
Attention:
The following rules are applicable to all call
forwarding types:
•
PSTN destinations (with
PSTN
or
Auto
call type)
have priority in
Forward to
list. If there are different
destinations in the Forward to list, the call will be
forwarded to PSTN destination (in the same time any
available SIP or PBX destinations will receive a short
ring). If the PSTN destination was not successful, the
next PSTN destination will be dialed, otherwise if
there are no more PSTN destinations in the table, the
call will be forwarded to any available SIP and PBX
destinations simultaneously.
•
If there are multiple entries with any combination of
PBX or SIP call types, then all destinations will ring
simultaneously and the call will be established with
the destination that will pick up the call the first.
Fig. II-151: Advanced Settings for SLA# page
•
Unconditional call forwarding service has higher priority versus to other forwarding types, i.e. when Unconditional Call Forwarding is enabled,
No Answer Forwarding services will not work even if they are enabled.
The table displayed in each page of Call Forwarding configuration lists the destinations where incoming calls addressed to the corresponding SLA
line will be forwarded.