Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.2.x)
37
The following columns are present in the table:
•
Extension
- lists user or attendant extensions on the Quadro. This number is used for internal PBX calls.
•
Display Name
- indicates an optional
display name to identify the caller.
•
Attached Line
- indicates the IP line
corresponding extension is attached to.
“R” is displayed in this column when
SIP
Remote Extension
(see below)
functionality is enabled on the extension.
•
SIP Address
- displays the SIP address
of the corresponding extension. The
column displays the full SIP address, (i.e.,
username@sipserver:port) when the
Registration on SIP Server
checkbox is
selected. If registration is disabled, the
SIP address will be displayed in the
following format: “username, Proxy:
sipserver:port”. If no SIP registration
server or SIP server port is defined,
corresponding information will not be
included in this column. If no username is
defined, the extension number will be
displayed instead
.
Fig. II-67: Extensions Management page
•
Percentage of System Memory
- indicates the user space (in percentages) configured for each extension. The actual available duration (in
minutes) for the extension voice mails, uploaded/recorded greetings and blocking messages is also displayed here. The available minutes
corresponding to the selected user space are dependent on the Voice Recording codec selected from the
page. For example, for the same amount of marked out user space, selection of the G726 voice recording codec will provide more space for
voice mails and user defined voice greetings than the G711 codec selection.
•
Call Relay
- indicates whether or not the Call Relay option is enabled on the extension.
•
Codecs
– column lists the short information (full information is seen in the tool tip) about extension specific voice Codecs. Extension
codec’s can be accessed and modified by clicking on the link of the corresponding extension’s Codecs. The link leads to the
•
Extension
Codecs
page
.
Clicking on each user extension in the Extensions table will open the extension specific
Extension Settings
menu. The Pickup Group, Call Park and
Paging Group extensions are displayed without a link in the Extensions Management table and extension pages. Additionally, the supplementary
services configuration pages will not be accessible for this type of extensions.
Add
opens the
Add Entry
page where the type and number
of the new extension should be defined. This page consists of
the following components:
The
Extension
text field is used to enter a new extension
number. If non-digit symbols have been entered, the error
“Incorrect Extension: no symbol characters allowed” will
appear. If an extension with the same number already exists
in the Extensions Management table, the error “Extension
already exists” will appear.
Fig. II-68: Extensions Management - Add Entry page
Please
Note
:
Extension number cannot start with the digits 0. You can add extensions of up to 20 digits long. However, the
adjusted automatically; you may need to manually adjust the routing rules for extensions in custom length.
The
Type
drop down list is used to select the type of the extension (User Extension, Pickup Group, Call Park, Paging Group or Attendant) to be
created (for details see below).
Reset SIP Settings
functional button is used to reset all SIP settings of the selected extension(s) to the default values, including all settings listed
under SIP Settings and SIP Advanced Settings pages (see below).
Edit
opens the
Edit Entry
page where a newly created user or attendant extension settings might be adjusted. To operate with
Edit
, one or more
record(s) have to be selected, otherwise the “No records selected” error message will appear.
The
Edit Entry
page consists of two frames. In the left frame settings groups are listed. Clicking on the corresponding settings group displays their
configuration options in the right frame.
Please Note:
Save changes before moving among settings groups.
