Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.2.x)
11
System Security Management
The
System Security Management
offers a possibility of managing the global security levels, running the system security diagnostics program and
receiving complete reports on the Quadro configuration security. It includes two pages- the
System Security Settings
page and the
System
Security Diagnostics
page.
Fig. II-11: Quadro System Security Management page
The
System Security Settings
page includes the following components:
The
Security Level table
- allows selecting the Security Level defining requirements to the IP Lines' password strength and the Security Report
granularity. The security levels are as follows:
•
Low
- There are no specific restrictions on the strength of the saved password. Only the critical warnings on the Call Routing Rules to PSTN
and IP-PSTN, disabled Firewall and IDS will be generated in Security Report.
•
Medium
- The minimum strength of the IP Line passwords should be "good". The Security Report will generate warnings on all unsecured
Call Routing rules, IP Line passwords, Firewall level (if it is set to lower than "Medium") and disabled IDS.
•
High
- The minimum strength of the IP Line passwords should be "strong". The Security Report will generate warnings on the IP Line
passwords, disabled IDS, unsecured SIP, and unsecured Routing Rules to SIP, PSTN and IP-PSTN and also regarding the Firewall level if
it is set to lower than "High".
The Enable SIP IDS checkbox- allows to prevent the SIP attacks.
The
System Security Diagnostics
page allows running the security audit and getting the security reports. The Start Security Audit functional button
is used for running the security audit. The Quadro Security Audit is a security reporting system, which generates the warnings regarding the
Quadro's weaknesses relative to the selected Security Level. The warnings may vary depending on the selected global Security Level. The Security
Audit will detect the security related configuration issues in Firewall, IDS, IP Line passwords, Call Routing and extension settings.