QMS Magicolor 330 Operations Download Page 34

Page: 34 / 226

* !

Turn the knob as far as it
will go clockwise to move to
the next position.

Continue doing steps 2 and 3
until the color to be replaced is
showing.

Rotate the toner cartridge
counterclockwise until the
“

” mark on the cartridge is

aligned with the printer’s
Unlock position.

Remove and discard the
empty toner cartridge.

Caution:

Dispose of old toner cartridges in accordance with local

regulations. Do not burn them.

Remove the new toner cartridge from its box.

Distribute the toner in the
cartridge.

Holding the cartridge with both
hands, gently rock it from side-
to-side seven or eight times.

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

Summary of Contents for Magicolor 330



































































































































































































































Search results

Summary of Contents for Magicolor 330

Reviews:

Related manuals for Magicolor 330

Brands by name

Popular brands

QMS Magicolor 330, Operations

Search results

Summary of Contents for Magicolor 330

Reviews:

Related manuals for Magicolor 330

Brands by name

Popular brands