QMS Magicolor 330, Operations

Page: 75 / 226

) -
)!
ICC Simulation pop-up menus. These are only available once profiles
have been successfully downloaded to the printer.
$"3"
The third and final color matching option for the
magicolor 330 is
obtained by utilizing the Postscript Level 2 functions available though
the LaserWriter driver. Postscript Level 2 color matching allows the
user to access the printer’s Color Rendering Dictionaries, commonly
know as CRDs. Listed below are the steps required to activate Post-
script Level 2 color matching.
1 Make sure you've installed the
magicolor 330 PPD and you
have the
magicolor 330 ICC profiles installed correctly on
your Macintosh. If you have not, locate the QMS Software
Utilities CD-ROM that shipped with your printer and install
these first.
2 Prepare your document for color printing and access the
Print dialog box by selecting Print.. from the File menu. Once
you are in the main print dialog box, select Color Matching
from the General pop-up menu.
3 You will be presented with three pop-up menus once you
are in the Color Matching section. Listed below are the three
menus.
Print Color
Intent
Printer Profile
4 You will need to change the Print Color: pop-up menu from
Color/Grayscale to Postscript Color Matching. If this selec-
tion is not made, you will not activate the CRDs that are built
into the
magicolor 330 for this type of color matching.
5 In the Printer Profile: pop-up menu, you will need to select
magicolor 330 from the list of printers. If you do not see the
magicolor 330 listed, you do not have the ICC profiles
installed correctly. With System 8.1, the ICC profiles are
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500