QMS Magicolor 330, Operations

Page: 91 / 226

* !
, *
$ )
Caution: The fuser unit is an integral part of the imaging process and
is also expensive to replace. Fuser life will be shortened (or the fuser
permanently damaged) if the oil roller is not changed when needed
and installed properly. This type of damage is not covered under
warranty or service contract.
WARNING! The fuser unit can become extremely hot and cause
severe burns. Make sure the unit is cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit einige
Zeit abkühlen, bevor Sie diese berühren.
1 Turn off the printer.
2 Lower the face-up tray.
3 Open the fuser unit on the
left side of the printer.
4 Remove the old fuser oil
roller.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500