QMS Magicolor 330, Operations

Page: 157 / 226

!
"
'$ !) ) .
CMM Error 1 - Not enough
profiles. An ICC profile file,
specified for the color
matching operation,
was not found.
This error occurs when
you attempt to select a
profile that has not
been loaded.
If this error occurs while
you’re trying to access
a user-installed profile,
verify that it has been
properly loaded onto
the printer’s hard disk
and registered by the
color matching system.
Do this by examining
the Operator Control/
Color Matching/ICC
Simulation or Operator
Control/Color Matching/
ICC RGB Source
menu. The ICC
description field of the
desired profile should
be visible in one of the
menus, depending on
the profile type. If the
profile doesn’t show up,
repeat the profile down-
load and registration
sequence.
CMM Error 2 - Bad input
LUT entries. The input entries in the
color look-up table are
invalid.
This error occurs if the
color matching routines
determine that the pro-
files used to generate a
color matching device
link are invalid.
If this error occurs while
you’re using custom
profiles, ensure that the
profile file has not been
corrupted or damaged.
Then repeat the profile
download and registra-
tion sequence.
If the problem persists,
call for service.
CMM Error 3 - Bad output
LUT entries. The device link table
created by the color
matching routines is
corrupted. Call for service.
This message... means... Do this...
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500