QMS Magicolor 330, Operations

Page: 28 / 226

!
)
$
Caution: If full-color transparencies are set backwards or upside
down, they may jam in the printer.
4 Remove each transparency from the output tray as soon as it
prints.
Caution: If transparencies are allowed to accumulate in the
output tray, resulting static electricity may cause a media jam.
Formatting Your printer receives the instructions to print on envelopes
from your application.
When formatting data for envelopes, leave at least a 0.16"
(4.06 mm) margin from the edges of the envelope.
See your application documentation for specific information
on printing envelopes.
Input Source
Multipurpose tray
Capacity Up to 20, depending on the thickness of the
envelopes (select Thick Stock in all cases).
Output Face-up tray
Type Refer to the specifications in chapter 2, “Print Media,” in the
Reference manual.
Notes Use envelopes with a smooth exterior surface. Envelopes
with a rough surface may jam in the media cassette.
Some parts of the envelope consist of three layers of
paper—the front, back, and flap. Anything printed in
these layered regions may be lost or faded.
You can print only on the front (address) side of the
envelope.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500