QMS Magicolor 330, Operations

Page: 84 / 226

!
)
$
;
Either clean the printer before use, or allow a few minutes after
unplugging it to allow the fuser unit to cool down.
Turn off the printer, unplug the power cord, and disconnect all
interface cables before cleaning inside the printer.
Read all caution and warning labels carefully, making sure to
follow any instructions contained in them. These labels are
located on the inside of the printer’s covers and the interior
of the printer body.
Use only dry, lint-free cotton cloths or swabs.
Make sure any parts removed during cleaning are replaced
before you plug in the power cord, reconnect the interface cables,
and turn on the printer.
» Note: In compliance with UL guidelines, “The appliance inlet is
considered to be the main disconnect device.”
$< +
1 Turn off and unplug the printer.
2 Open the printer’s exit
roller cover.
3 Using a clean, dry cotton cloth, clean the paper exit rollers
while manually rotating each one.
4 Close the printer’s exit roller cover.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500