QMS Magicolor 330, Operations

Page: 57 / 226

5*
!#
$ )!
Download device profiles: For custom color matching,
QCOLOR supports downloaded (to disk only) ICC profiles.
Support for Internet standard: QMS QCOLOR uses sRGB for
Internet-standard default color matching.
Individual page element correction: QCOLOR separately color
corrects (matches) graphics, text, and images on a singe page
using printer-resident CRDs.
&,!
Listed below are the choices that you will have within your driver for
selecting an RGB Source. Depending on the installed driver and the
specific operating system, these choices appear in different places.
Use RGB Source to indicate the type of computer monitor for color
matching.
sRGB (a proposed common standard color space based on the
average performance of PC monitors)
Trinitron G1.8 D50 (listed on the configuration menu as Trin G1.8
D50 or Sony Trinitron)—a widely available CRT found in many
monitors
Apple RGB (Apple 13" Monitor, the default Photoshop setting
listed in the configuration menu as Apple 13)
Prepress (the SMPTE-240M standard), also known as
Adobe RGB
Max Gamut (the greatest possible range of color variation)
Printer Default (the RGB source set in the printer’s config-
uration menu)
!"
You will need to set a simulation choice if you intend to utilize the
built-in color management system on the
magicolor 330. These
choices allow the magicolor 330 to simulate a target device. The
desired device could be another printer, a printing press, or a prede-
termined printing standard. Listed below are the simulation choices
available through the operator control panel or the software driver.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500