QMS Magicolor 330 Operations Download Page 17

Page: 17 / 226

" ##

Rough envelopes or envelopes with clips

Self-adhering envelopes

Note:

If acidic paper is used, characters may fade; in which case,

change to a neutral paper.

Sheets adhered with static electricity

Label sheets with the backing sheet exposed

Any media that is affected by high fusing temperature
(311° F/155° C)

Take a stack of about 250 sheets (½ ream).

Caution:

Don’t unwrap paper above the printer as this might

cause paper particles to fall into the printer.

Fan paper to separate it and to help prevent static buildup
that may cause double feeding.

Note:

Do not fan transparencies.

Take off the top and bottom sheets.

Residual glue buildup on these sheets may cause media jams.

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

Summary of Contents for Magicolor 330



































































































































































































































Search results

Summary of Contents for Magicolor 330

Reviews:

QMS Magicolor 330, Operations, Page: 17 / 226

Search results

Summary of Contents for Magicolor 330

Reviews: