QMS Magicolor 330, Operations, Page: 167 / 226

) ) .
1
'$ !) ) .
WARNING! Before performing any troubleshooting, be sure to turn
the printer off and unplug it to prevent shock.
ACHTUNG! Bevor Sie im Gerät nach Fehlern suchen, vergewissem
Sie sick, daß der Drucker ausgeschaltet und aus der Steckdose
ausgesteckt ist.
If there is no status message in the control panel message window,
use the following steps to identify the source of your problem and to
learn of possible solutions:
1 Does the printer power light come on?
YES—Go to question 2.
NO—Check the following:
Is power supplied to the AC outlet?
Is the power cord plugged securely into both the power
outlet and the printer? Turn the power switch off, and
plug in the power cord connection firmly; then turn the
power switch on.
» Note: In compliance with UL guidelines, “The appliance inlet
is considered to be the main disconnect device.”
Is the printer power switch in the On position ( I )?
Is the power outlet working?
Does the line AC voltage from the power outlet match the
printer’s power requirements? See appendix B, “Techni-
cal Specifications,” in the
Reference manual.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500