83
f622
Factory reserved
f623
Factory reserved
2.8 Additional function parameter group
NO.
Parameter Name
Setting Range
Default
f700
Panel JOG mode selection
0~1
0
0: disable JOG key.
1: enable JOG key.
This mode allows you to jog the motor by controlling the operation from the keypad. This
mode is hidden by default.
When under the standard monitor mode, pressing the key JOG will move the inverter to
jog mode and displays jogor-jog. Press ▲ or ▼ to change jog direction.
NO.
Parameter Name
Setting Range
Default
f701
jog run frequency
0.0~20.0
5.0
NO.
Parameter Name
Setting Range
Default
f702
Jog stopping pattern
0~2
0
0: Slow down stop.
1: coast stop.
2: DC braking.
Use the jog run parameters to operate the motor in jog mode. Input of a jog run signal
generates a jog run frequency output at once, irrespective of the designated acceleration
time.
NO.
Parameter Name
Setting Range
Default
f703
Jump frequency 1
0.0 Hz ~f007
0.0
f704
Jumping width 1
0.0~30.0 Hz
0.0
f705
Jump frequency 2
0.0 Hz ~f007
0.0
f706
Jumping width 2
0.0~30.0 Hz
0.0
f707
Jump frequency 3
0.0 Hz ~f007
0.0
