41
Note 2: The difference between 2-wire control and 3-wire operation configuration lies in
whether logic input function 30 (3-wire control shutdown input) is used.
NO.
Parameter Name
Setting Range
Default
f305
AI1 voltage-current input selection
0~2
0
1:0
～
5V voltage signal input.
2:0
～
10V voltage signal input.
Note: AI2 only accept 0~10VDC voltage signal input, setting value of f305 will not change
the characteristic of AI2.
NO.
Parameter Name
Setting Range
Default
f306
sink/source mode selection
0~1
1
0: Source (Positive) logic terminal mode.
1: Sink (Negative) logic terminal mode
NO.
Parameter Name
Setting Range
Default
f307
AO voltage-current output selection
0~1
1
0: Current signal output.
1: Voltage signal output.
NO.
Parameter Name
Setting Range
Default
f308
Input terminal function of AI1
0~69
0
When f300 disabled, the set value of f308 cannot be read out.
When f300 set at 1or 2, AI1 is enabled, and can be used as a contact input terminal.
NO.
Parameter Name
Setting Range
Default
f309
Always-active terminal selection 1
0~69
1
f310
Always-active terminal selection 2
0~69
0
f309 and f310 specifies an input terminal function that is always to be kept active (ON).
