QED AutoPump AP-2, Operation Manual

Page: 19 / 111

Page 11
AP-2 Manual
Revision 7 - August, 2007
Options and Accessories
The following options and accessories are available from QED . Contact your QED
Representative regarding the following:
• AP Data Module – This water-resistant enclosure protects and shields surface
instrumentation from weather and/or harsh site conditions while providing easy visual
access to key system instrumentation readings. The options available for inclusion inside
the NEMA 3R enclosure are a filter/regulator, pump cycle counter, level sensor regulator
and gauge with air flow meter. Also included are a fluid level indicator with an On/Off
switch, an Air Inlet Supply Gauge, and a Vacuum/Pressure reference with Gauge.
• Pump Cycle Counter (PCC) – A PCC counts the number of times a pump cycles.
The counter provides information for maintenance, service, and statistical purposes with
minimal loss in air pressure or performance. A PCC is easily attached on the air inlet
hose to the pump.
• TFSO – The Tank-Full Shut-Off (TFSO) System is a unique, self-contained pneumatic
system that shuts down other pneumatic systems in the event of a liquid level rise or a
pressure increase in a container. The TFSO provides dual safety by using two sensors.
The system is expandable—the button sensor of the system can be teed to monitor many
containers.
• Inlet Conversions – AutoPumps can be converted from Top- to Bottom-Loading and vice
versa. See Appendix C for more information.
• Extended Leachate Screens – (see figure 5)
Chapter 2: Overview