Maintenance Chart
49--014
Page 3 of 4
8 — 110
WK49_014_1203GB
Drive out the fastening bolts.
Notes
Pay attention to the spacer tube.
Remove the drawgear.
Place the other drawgear included in the scope of supply into
position.
Insert the fastening bolts.
Danger
Viewed from the direction of travel, always insert the fastening bolts
from the left hand side.
Screw on the new self-locking nuts and tighten with the tighte-
ning torque specified in the table.
The type and version are engraved on the drawgear.
Trailer coupling ring tightening torque:
Type
Model
Number of
bolts
Bolt
dimensions
Tightening
torque
A
2
M 12 8.8
86 Nm
D 40
B
2
M 12 8.8
86 Nm
D 40
D
2
M 16 8.8
210 Nm
F
2
M 12 10.9
125 Nm
Drawgear assembly