Maintenance Chart
44--110
Page 4 of 4
8 — 50
WK44_110_1203GB
The following checks are necessary after changing the engine oil
and engine oil filter:
Start the engine. Refer also to chapter: “Starting up” -- section:
“Starting the engine”.
Allow the engine to run for approximately 2 minutes, checking
for leaks from the oil drain plug and engine oil filter.
Check the engine oil pressure at the “Engine oil pressure” si-
gnal lamp.
Switch off the engine and check the oil level using the oil dip-
stick.
Top up the oil level as necessary.
Check the oil filter cartridge for leaks.
Seal up any leakages that occur.
Checking for leaks