48--008
Page 2 of 6
Maintenance Chart
8 — 77
WK48_008_1301GB
The following steps describe how to remove the mixer shaft:
Remove all necessary lubrication lines and seal them with
plugs.
Suspended Load
Use only suitable lifting equipment for lifting components.
Notes
It is advisable to use belts and straps to avoid causing damage.
Suspend the mixer shaft on suitable lifting equipment.
5
3
4
3
1
2
Item
Designation
1
Torque casting stand with detent
2
Engine cover
3
Bearing flange
4
Mixer shaft
5
Hydraulic motor
Remove the engine cover (2).
Remove the hexagon nut from the torque casting stand (1).
Removing mixer shaft
