General Technical Description
3 — 20
02_0773_1404GB
A pressure calibrator is integrated in the machine.
The calibrator is used to adjust the delivery pressure to a setting bet-
ween 40 and 70 bar.
A padlock is attached for security.
The pressure calibrator is located at the front left of the frame, vie-
wed in the direction of travel.
You have to open the hood to reach the pressure calibrator.
1
2
Item
Designation
1
Ball valve (pressure calibrator)
2
Function label 40 or 70 bar
If an air chamber or delivery lines are installed, but are only desi-
gned to withstand 40 bar, select the 40 bar setting on the pressure
calibrator.
Danger
Never select the 70 bar setting on the pressure calibrator if the instal-
led air chamber or delivery lines are only approved for 40 bar!
A padlock must always be attached and locked!
3.17
Pressure calibrator
