Safety Regulations
2 — 8
03_0177_1012GB
It is prohibited to make any change to the following factory settings:
-- Pressure and performance settings
-- Software versions and software parameters
Structural modifications
It is prohibited to fit accessories and attachment parts if they have
not been expressly approved by the manufacturer.
Never make any modifications, additions or conversions to the ma-
chine that could affect safety without first obtaining the manufactu-
rer’s approval.
Welding must never be performed on bearing parts, pressure reser-
voirs, fuel or oil systems, etc.
Welding work is only authorised by explicit agreement with the ma-
nufacturer. It must only be carried out by skilled, authorised specia-
lists.
It is prohibited to use screws, bolts and nuts that do not conform to
the specifications in the spare parts sheets.
Reuse of the following screws, bolts and nuts is prohibited:
-- self-locking nuts
-- screws with microencapsulated adhesive
-- bolts/screws of property class 10.9 and upwards
Screws, bolts and nuts must always be tightened to the specified
tightening torques.
Changes to factory set-
tings
Incorrect screws/bolts/
nuts and tightening tor-
ques
