Safety Regulations
2 — 17
03_0126_0710GB
During the following operating modes at the machine:
-- Set-up
-- Starting up
-- Operation
-- Cleaning, Troubleshooting, Maintenance
-- Decommissioning
Danger of crushing and bumping.
When loading the machine with a crane onto a transport vehicle,
the machine must only be suspended on the attachment points pro-
vided. Only in this way can you be sure that the machine is suspen-
ded horizontally and securely in the hook and will not be able to tip
over.
If your machine is fitted with attachment points, these will be located
on the top of the machine and are marked in colour.
Danger of crushing
The machine may only be loaded by crane if fitted with suitable at-
tachment points.
Use only suitable lifting equipment for lifting components.
Lifting equipment, lifting tackle, support trestles and other auxiliary
equipment must be reliable and safe in operation.
Make sure that the load bearing capacity is sufficient.
When lifting with the crane, determine the centre of gravity of the ma-
chine by lifting carefully. All cables or chains on the lifting gear must
be tensioned evenly and the machine must be raised evenly at all
support points.
The machine must only be loaded onto a suitable transport vehicle
and must be secured against rolling, sliding and overturning during
transport.
Continuation next side
2.10 Danger of crushing
and bumping
Transporting the ma-
chine
