Safety Regulations
2 — 5
03_0177_1012GB
Improper use and/or reasonably foreseeable misuse is any use
that is not described in the section ”Designated use”, or that goes
beyond this.
The manufacturer shall not be held liable for any consequential da-
mage. A few examples are listed below:
Operation with defects
It is prohibited to operate the machine with defects (examples):
-- loose or damaged bolts
-- leakages
-- incorrect fill levels
-- incorrect operating materials
-- worn, damaged or defective components
(cables, connectors and hoses, delivery lines, etc.)
-- worn, damaged or illegible signage
-- worn, damaged or defective safety equipment
-- deactivated or modified safety equipment
-- unauthorised or modified connections or fuses
Depending on the particular model, the machine is fitted with diffe-
rent pieces of safety equipment that serve as protection against se-
vere personal injuries.
It is prohibited to dismantle, modify or decommission safety equip-
ment.
If the safety equipment is not fully functional, or has been modified,
damaged or removed, the machine must be shut down and secured
at once. Any defects must be repaired immediately.
All guards must be undamaged, fully installed and fully functional.
Visual checks must be carried out every day to ensure this is the
case.
If movable safety equipment is fitted, a function check must be car-
ried out on each occasion before the machine is used.
2.3
Improper use and/or
reasonably foreseea-
ble misuse
Safety factors
Removing/modifying sa-
fety equipment
