Maintenance Chart
46--022
Page 2 of 9
8 — 68
WK46_022_1301GB
Proceed as follows to shut down the machine:
Refer also to chapter “
Starting up
” -- section “
Shutting down the ma-
chine after operation
”.
Set the output controller to “min”.
⇒
The pump stops.
Switch the pump off.
Set the manual throttle to the idle position.
Stop the driving motor.
Secure the machine against unauthorised starting.
Secure your working area and fix information signs to the lok-
ked controls and setting devices.
Proceed as follows to shut down the machine:
Refer also to chapter “
Starting up
” -- section “
Starting engine
”.
Set the output controller to “min”.
Set the manual throttle to the idle position.
Start the engine.
Actuate the toggle switch “Acknowledge EMERGENCY STOP”.
Accelerate using the manual throttle and wait until the motor
runs correctly.
Switch the pump on.
Set the output controller to the desired position.
Shutting down the ma-
chine
Starting the machine