TTFM 6.1 INSTRUCTION MANUAL
66
4. Tighten the assembly in place with the two hose clamps. For a horizontal pipe, position the bracket at 3 or
9 o’clock. Hold the level up to the top of the bracket to ensure the angle is correct. For vertical pipes, the
bracket can be at any orientation about the pipe. Use a 5/16” nut driver to tighten the hose clamps:
5. Mark the position of the center line of the bracket which is to be moved to the opposite side of the pipe.
It is up to you to determine which bracket is easier to move from the current position:
