Proware EP-3164D-GAS3 User Manual Download

Page: 77 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

Health

The health of snapshot:

“Good”

The snapshot is good.

“Failed”

The snapshot fails.

Exposure

Snapshot VD is exposed or not.

Right

The right of snapshot:

“Read-write”

The snapshot VD can be read / write.

“Read-only”

The snapshot VD is read only.

#LUN

Number of LUN(s) that snapshot VD is attached.

Created time

Snapshot VD created time.

Snapshot operation description:

Expose/

Unexpose

Expose / unexpose the snapshot VD.

Rollback

Rollback the snapshot VD.

Delete

Delete the snapshot VD.

Attach

Attach a LUN.

Detach

Detach a LUN.

List LUN

List attached LUN(s).

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands