Proware EP-3164D-GAS3 User Manual Download

Page: 69 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

#VD

The number of virtual disks in RAID group.

Status

The status of RAID group.

“Online”

the RAID group is online.

“Offline”

the RAID group is offline.

“Rebuild”

the RAID group is being rebuilt.

“Migrate”

the RAID group is being migrated.

“Scrubbing”

the RAID group is being scrubbed.

Health

The health of RAID group.

“Good”

the RAID group is good.

“Failed”

the hard drive is failed.

“Degraded”

the RAID group is not completed. The

reason could be lack of one disk or disk failure.

RAID

The RAID level of the RAID group.

Current
Owner

The owner of the RAID group. The default owner is
controller 1.

Preferred

owner

The preferred owner of the RAID group. The default owner

is controller 1.

RG operations description:

Create

Create a RAID group.

Migrate

Migrate a RAID group. Please refer to next chapter for more

detail.

Activate

Activate a RAID group; it can be executed when RG status
is offline. This is for online roaming purpose.

Deactivate

Deactivate a RAID group; it can be executed when RG

status is online. This is for online roaming purpose.

Parity check

Regenerate parity for the RAID group. It supports RAID 3 /

5 / 6 / 30 / 50 / 60.

Delete

Delete a RAID group.

Set preferred
owner

Set the RG ownership to the other controller.

Set disk

property

Change the disk status of write cache and standby.

Write Cache

options:

“Enabled”

Enable disk write cache.

“Disabled”

Disable disk write cache.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands