Proware EP-3164D-GAS3 User Manual Download

Page: 20 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

Environment Status LEDs

Parts

Function

Power LED

Green LED indicates power is ON.

Power Fail LED

If a redundant power supply unit fails, this
LED will turn to RED and alarm will sound.

Fan Fail LED

When a fan fails or the fan’s rotational speed
is below 1500RPM, this LED will turn red and
an alarm will sound.

Over Temperature LED

If temperature irregularities in the system
occurs (HDD slot temperature over 65°C,
Controller temperature over 70°C), this LED

will turn RED and alarm will sound.

Voltage Warning LED

An alarm will sound warning of a voltage
abnormality and this LED will turn red.

Activity LED

This LED will blink blue when the RAID
subsystem is busy or active.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands