Proware EP-3164D-GAS3, User Manual

Page: 82 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem
82 User Manual
Step 4: Set global spare disk.
To set global spare disks, please follow the procedures.
1. Select “/ Volume configuration / Physical disk” .
2. Check the gray button next to the PD slot; click “Set Global spare” .
3. “Global spare” icon is shown in “Usage” column.
Slot 4 is set as global spare disk (GS).
Step 5: Done. LUNs can be used as disks.
To delete VDs, RG, please follow the steps listed below.
Step 6: Detach LUN from VD.
In
“/ Volume configuration / Logical unit” ,
1. Check the gray button next to the LUN; click “Detach” . There will pop up a
confirmation page.
2. Choose “OK”.
3. Done.
Step 7: Delete VD (Virtual disk).
To delete the Virtual disk, please follow the procedures:
1. Select “/ Volume configuration / Virtual disk” .
2. Check the gray button next to the VD number; click “Delete” . There will pop
up a confirmation page, click “OK” .