Proware EP-3164D-GAS3 User Manual Download

Page: 64 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

5.4 Volume Configuration

“Volume configuration”

is designed for setting up the volume configuration which

includes

“Physical disk”

“RAID group”

“Virtual disk”

“Snapshot”,

and

“Logical unit”

5.4.1 Physical Disk

“Physical disk”

can be used to view the status of hard drives in the system. The

following are operational tips:

Check the gray button next to the number of slot, it will show the functions which
can be executed.

Active function can be selected, and inactive functions show up in gray color and
cannot be selected.

For example, set PD slot number 8 to dedicated spare disk.

Step 1:

Check the gray button of PD 8, select

“Set Dedicated spare”

, it will link to

next page.

Step 2:

Maybe there are some existing RGs which can be assigned dedicate spare

disk. Select which RG will be assigned, then click “

Submit

”.

Step 3:

Done.

View

“Physical disk”

page.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands