Proware EP-3164D-GAS3 User Manual Download

Page: 40 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

There are seven indicators at the top-right corner.

RAID light:

Green

RAID works well.

Red

RAID fails.

Temperature light:

Green

Temperature is normal.

Red

Temperature is abnormal.

Voltage light:

Green

voltage is normal.

Red

voltage is abnormal.

UPS light:

Green

UPS works well.

Red

UPS fails.

Fan light:

Green

Fan works well.

Red

Fan fails.

Power light:

Green

Power works well.

Red

Power fails.

Dual controller light:

Green

Both controller1 and controller2 are

present and well.

Orange

The system is degraded and there is

only 1 controller alive and well.

Return to home page.

Logout the management web UI.

Mute alarm beeper.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands