Proware EP-3164D-GAS3, User Manual

Page: 141 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual 141
ERROR IPC FW upgrade
timeout System firmware upgrade timeout on another
controller
INFO Config imported <string> config imported
š
HAC events
Level Type Description
INFO RG owner changed The preferred owner of RG <name> has been
changed to controller <number>.
INFO Force CTR write
through Controller <number> forced to adopt write-
through mode on failover.
INFO Restore CTR cache
mode
Controller <number> restored to previous caching
mode on failback.
INFO Failover complete All volumes in controller <number> completed
failover process.
INFO Failback complete All volumes in controller <number> completed
failback process.
INFO CTR inserted Controller <number> is inserted into system
ERROR CTR removed Controller <number> is removed from system
ERROR CTR timeout Controller <number> gets no response
ERROR CTR lockdown Controller <number> is locked down
ERROR CTR memory NG Memory size mismatch
ERROR CTR firmware NG Firmware version mismatch
ERROR CTR lowspeed NG Low speed inter link is down
ERROR CTR highspeed NG High speed inter link is down
ERROR CTR backend NG SAS expander is down
ERROR CTR frontend NG FC IO controller is down
INFO CTR reboot FW
sync Controller reboot, reason [Firmware
synchronization completed]
š
Clone events
Level Type Description
INFO VD clone started VD <name> starts cloning process.
INFO VD clone finished VD <name> finished cloning process.
WARNING VD clone failed The cloning in VD <name> failed.
INFO VD clone aborted The cloning in VD <name> was aborted.
INFO VD clone set The clone of VD <name> has been designated.
INFO VD clone reset The clone of VD <name> is no longer designated.
WARNING Auto clone error Auto clone task: <string>.
WARNING Auto clone no snap Auto clone task: Snapshot <name> is not found
for VD <name>.