Proware EP-3164D-GAS3 User Manual Download

Page: 21 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

2.1.2 Rear View

1. Controller Module

The subsystem has one or two controller modules.

2. Power Supply Unit 1 ~ 2

Two power supplies (power supply 1 and power supply 2) are located at the rear of the
subsystem. Each PSFM has one Power Supply and two Fans. The PSFM 1 has Power#1,

Fan#1 and Fan#2. The PSFM 2 has Power#2, Fan#3 and Fan#4.
Turn on the power of these power supplies to power-on the subsystem. The “power”

LED at the front panel will turn green.

If a power supply fails to function or a power supply was not turned on, the “

”

Power fail LED will turn red and an alarm will sound.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands