Proware EP-3164D-GAS3 User Manual Download

Page: 19 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

2.1.2.2 LCD Front Panel

Smart Function Front Panel

The smart LCD panel is an option to configure the RAID subsystem. If you are
configuring the subsystem using the LCD panel, press the Select button to login and
configure the RAID subsystem.

Parts

Function

Up and Down

Arrow buttons

Use the Up or Down arrow keys to go through

the information on the LCD screen. This is also
used to move between each menu when you
configure the subsystem.

Select button

This is used to enter the option you have

selected.

Exit button

EXIT

Press this button to return to the previous

menu.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands