iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
61
Change portal:
Users can change the portals belonging to the device node of each controller.
1.
Check the gray button of
“OP.”
column next to one device node.
2.
Select
“Change portal”
.
3.
Choose the portals for the controller.
4.
Click
“OK”
to confirm.
Rename alias:
User can create an alias to one device node.
1.
Check the gray button of
“OP.”
column next to one device node.
2.
Select
“Rename alias”
.
3.
Create an alias for that device node.
4.
Click
“OK”
to confirm.
5.
An alias appears at the end of that device node.
NOTE: After setting CHAP, the initiator in host/server should be
set the same CHAP account. Otherwise, user cannot login.
Summary of Contents for EP-3164D-GAS3
