Proware EP-3164D-GAS3 User Manual Download

Page: 51 / 160

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

5.2.3 Login Setting

“Login setting”

can set single admin, auto logout time and Admin/User password.

The single admin can prevent multiple users access the same controller at the same
time.

Auto logout:

The options are (1) Disable; (2) 5 minutes; (3) 30 minutes; (4)

1 hour. The system will log out automatically when user is inactive for a period
of time.

Login lock:

Disable/Enable. When the login lock is enabled, the system allows

only one user to login or modify system settings.

Check

“Change admin password”

“Change user password”

to change admin or

user password. The maximum length of password is 12 characters.

Summary of Contents for EP-3164D-GAS3

































































































































































Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands

Proware EP-3164D-GAS3, User Manual

Search results

Summary of Contents for EP-3164D-GAS3

Reviews:

Related manuals for EP-3164D-GAS3

Brands by name

Popular brands