Prophete REX BIKE, Operating Instructions Manual

Page: 136 / 436

48 EN
DRIVE SYSTEM
LCD CONTROL DISPLAY
The drive system is operated using the LCD display on
the left-hand side of the handlebar (Fig. AZ).
SWITCHING THE DRIVE SYSTEM ON/OFF
1. Hold down the button
1
(Fig. AZ) of the control unit for approx. 2 seconds.
AZ
2 3 4
8 7 6 5
1
1
ON/OFF button Switches drive system on or off / confirmation button in the menu
2
Battery charge state
Current charge state of the battery
(<5% [flashing] / >5% / >10% / >30% / >50% / >75 %)
3
Speed display Current speed of e-bike in km/h or mph
4
Light control display Lighting system (switched on/switched off)
5
Function display TRIP → ODO → MAX → AVG → POWER → TIME
6
Mode display Display of current assistance level or pushing aid
7
Minus button – Use this button to increase the pedalling assistance in single-level incre-
ments. Holding down the button for a few seconds will activate the pushing
aid.
8
Plus button + Holding down the button for approx. 2 seconds will switch the lighting on or
off (see also the Lighting chapter).