Prophete REX BIKE, Operating Instructions Manual

Page: 135 / 436

Eng
lish
EN 47
tems with frame battery).
2. Hold down button
6
(Fig. AX) of the control unit for approx.
1.5 seconds.
When the e-bike is no longer in use, the display switches off
automatically after approx. 10 minutes.
OPERATING THE DRIVE SYSTEM
The drive system supports you when pedalling with additional motor power up to a speed of
25 km/h. If you stop pedalling during the ride, the motor will switch off automatically after a
brief delay.
The maximum support speed depends on the inserted gear and the chosen riding mode. The
higher the engaged gear, the higher the speed supported by the midengine.
Select the cycling mode with the buttons
1
(+) and
5
(-) of the EasyControl display (fig. AX).
No motor support, mini control display active
1 economical motor assistance
2 low motor assistance
3 normal motor assistance
4 strong motor assistance
5 maximum motor assistance
DRIVING BEHAVIOUR WITH MOTOR ASSISTANCE
The driving behaviour of an e-bike with active motor assistance is sometimes very different
from that of a bicycle.
You should therefore adapt the assistance level of the motor to the outside environment (e.g.
road surface, traffic density, surface conditions), the speed and your own capabilities. For ex -
ample, use either a low level of assistance or no assistance at all when driving into tight cur-
ves or when driving at a low speed.
PUSHING AID
Holding down the minus button
5
(Fig. AX) will accelerate the e-bike to a maximum speed of
6 km/h without any pedal movement. When the button is released prematurely and the pe-
dals aren't moving, the motor will stop automatically.
DRIVE SYSTEM
1
AY
1