Prophete REX BIKE, Operating Instructions Manual

Page: 103 / 436

Eng
lish
EN 15
FIRST COMMISSIONING & INSPECTIONS BEFORE STARTING A RIDE • PEDALS
PEDALS
INSTALLING THE PEDALS
1. Screw the right pedal on clockwise (right-hand thread!) and the left
pedal counter-clockwise (left-hand thread!) (fig. A).
2. tighten the two pedals with a 15-mm open-faced spanner or, if this
is to technically possible, with a 6-mm hexagon socket wrench ac-
cording to the torque specifications (see chapter with torque speci -
fications).
HOLDING THE FOLDING PEDALS IN/OUT
1. Push the slider
1
(fig. B) in.
2. Fold the pedals into the desired position
2
(fig. B).
L R
L = Left-hand thread
R = Right-hand thread
A
1 2
B
• Before every ride, check that the pedals are latched well.
Danger of accident!
DANGER
• The pedals must be tightened well at all times since they may otherwise break out of
their threads! Therefore, check both pedals for tight fit before every ride. Danger of dam -
age and accidents!
• if the pedals are swapped during installation, the threads will suffer damage and may
break out of the pedal arm after a while! Danger of accident! - No warranty if this is not
observed!
DANGER
WARNING