PRONAR T743, Operator'S Manual

Page: 37 / 150

Pronar T743 SECTION 2
2.12
•
Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
•
Incorrect loading of trailer may cause deterioration of machine steering
characteristics and braking action.
•
Do NOT move off or drive with extended front conveyor.
•
Do NOT climb on load box during loading and unloading.
•
Do not be in the danger zone i.e. near working auger conveyor, between tractor
and trailer and near to trans-shipment system drive elements.
•
After completing unloading, ensure that the load box is empty.
2.1.8 OPERATION OF PTO SHAFT
•
While reversing and during turns, the PTO drive must be disengaged.
•
Do NOT leave the tractor cab, when the machine drive is engaged.
•
The PTO shaft has markings on the casing, indicating, which end of the shaft
shall be connected to the tractor.
•
Never use a damaged PTO shaft, it may cause an accident. A damaged shaft
must be repaired or replaced.
•
Disconnect the drive shaft each time when it is not necessary to drive the
machine, or when the tractor and trailer are at an unsuitable angle to each other.
•
The chains preventing the shaft cover from turning while the shaft is working,
shall be secured to a fixed element of trailer structure.
•
Do NOT use the securing chains to support the shaft while machine is parked or
when transporting the machine.
•
Before using the machine, the user should thoroughly acquaint himself with the
PTO shaft Operator's Manual and adhere to the recommendations contained in it.
•
The trailer may only be connected to the tractor by appropriately selected PTO
shaft recommended by the Manufacturer.
•
The drive shaft must be equipped with a cover. Do NOT use the shaft with
damaged or missing guards.