PRONAR T743, Operator'S Manual

Page: 38 / 150

SECTION 2 Pronar T743
2.13
•
After connecting shaft ensure that it is correctly and safely connected to the
tractor and to the trailer.
•
Before starting the machine make sure that there are no bystanders (especially
children) in the danger zone. The machine operator is obliged to ensure proper
visibility of the machine and the working area.
•
When using the trailer and power takeoff shaft, do not use PTO rotation speed
greater than 1000 rpm. Do NOT overload shaft and machine and also engage the
clutch suddenly. Before starting PTO shaft make certain that the PTO rotation
direction is correct.
•
Before disconnecting the shaft, turn off the tractor engine and remove the key
from the ignition.
•
Do NOT wear loose clothing, straps or whatever that may become wrapped round
the rotating drive shaft. Contact with rotating PTO shaft may cause severe
injuries.
•
Do NOT go over and under the shaft or stand on it equally during work as also
when the machine is parked.
2.1.9 SAFETY TIPS FOR HYDRAULIC CLUTCH OPERATION
•
The user should ensure that for operation, maintenance and repairs only
authorised persons are employed, who are familiar with the mounting and
maintenance instructions, understand them and observe them in order to:
avoid physical danger and health risk to user and to third persons,
ensure operational safety of drive units,
Eliminate danger to the environment through incorrect machine
operation.
•
Conax clutch should be operated, maintained and repaired exclusively by
authorised, trained and instructed personnel.
•
All work on Conax clutch may only be performed with disconnected drive engine.
Secure engine against repeated, unintentional starting.